您的位置:驾驶员之家 >> 驾照考试英语题库 >> 铜仁科目一考试英文版

铜仁科目一考试英文版

1、In such road sections, you can enter the cross-hatched marking area to wait.

A. Right

B. Wrong

Answer:B

2、This set of the hand signals of the traffic police indicates that the vehicles should ____ .

A. turn right

B. change lane

C. reduce speed and pass slowly

D. pull over

Answer:C

3、Whats the meaning of this sign?

A. lanes for going in different directions

B. lane for both U turn and left turn

C. the lane of no left turn and no U turn

D. lane for both going straight and left turn

Answer:B

4、What kind of violation does this broken down vehicle have?

A. not turn on the hazard lights

B. not stop the car by the roadside

C. not solve the problem at once

D. not place the warning sign

Answer:D

5、Is there any effective auxiliary method to control the speed while driving on a long downhill road besides braking.

A. Shift to the neutral gear and slide

B. Use the engine to brake

C. Turn off the engine and slide

D. Depress the clutch and slide

Answer:B

6、When a driver needs to borrow a lane to bypass an obstacle in front and a vehicle in the opposite direction is approaching the obstacle, the driver should ___________.

A. Reduce speed or stop and yield to the vehicle coming in the opposite direction

B. Speed up and bypass the obstacle in advance

C. Honk to indicate the vehicle in the opposite direction to yield

D. Rapidly occupy the lane and force the vehicle coming in the opposite direction to stop and yield

Answer:A

7、When driving in icy and snowy weather, light reflection from the accumulated snow can easily make a driver feel dizzy and have an illusion.

A. Right

B. Wrong

Answer:A

8、When crossing each other at night, how far should change the high beam lights to low beam lights?

A. not need to change lights

B. beyond 150m

C. within 100m

D. within 50m

Answer:B

9、How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer:C

10、When driving a motorized vehicle uphill, you should speed up and honk when you going to reach the top of the slope.

A. Right

B. Wrong

Answer:B

11、Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. lanes for going in different directions

Answer:C

12、When encountering an ambulance rushing in the same lane in the opposite direction, the driver should ________.

A. Move to the road side, reduce speed or stop to yield

B. Drive on by using another lane

C. Speed up and change lane to avoid

D. Continue to go in the original lane

Answer:A

13、Whats the meaning of this sign?

A. Y-shaped intersection

B. T-shaped intersection

C. intersection

D. ring intersection

Answer:B

14、This sign indicates jammed section ahead and passing slowly.

A. Right

B. Wrong

Answer:B

15、How to use lights when pulling over on road?

A. turn on the hazard lights

B. turn on the right-turn signal in advance

C. use the high and low beam lights alternately

D. not need to use any light to indicate

Answer:B

16、Whats the meaning of this sign?

A. change to right lane

B. branching point

C. road surface becomes wider

D. the number of lanes increases

Answer:D

17、When passing a dangerous section of a mountain road, especially by the locations of frequent occurrence of landslides, mudslides, the driver should drive with care and avoid stopping.

A. Right

B. Wrong

Answer:A

18、Whats the meaning of this sign?

A. section narrows on both sides

B. section for speed test

C. section for ascertaining the distance between the vehicles

D. pay attentions to keeping distance

Answer:D

19、Whats the meaning of this sign?

A. stop to yield

B. one-way road

C. going first when crossing each other

D. the opposite vehicle goes first when crossing each other

Answer:C

20、What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer:C