深圳国外驾照换中国驾照

1、Whats the meaning of this sign?

A. bump road

B. low-lying road

C. high outburst road

D. hump bridge

Answer：B

2、When a vehicle changes lane, the driver should turn on the turn signal in advance,observe traffic conditions, maintain a safe distance and move into the new lane.

A. Right

B. Wrong

Answer：A

3、Whats the meaning of this sign?

A. water channel

B. bridge

C. tunnel

D. Culvert

Answer：C

4、How to do in this intersection?

A. wait in the cross-hatched marking area

B. stop and wait outside the intersection

C. follow the vehicle in front and pass

D. wait inside the intersection

Answer：B

5、What marking is the road mark in the circle?

A. crosswalk line

B. slowdown and yield line

C. stopping and yield line

D. intersection signal line

Answer：A

6、It lights if left door is not closed.

A. Right

B. Wrong

Answer：B

7、When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer：D

8、Whats the meaning of this mark on the road?

A. the lane for non-motorized vehicles

B. the special lane for motorcycles

C. the special lane for battery bicycles

D. the special lane for bicycles

Answer：A

9、A driver applies for the driving license for the first time and is during the period of probation, he can drive a motorized vehicle on expressway alone.

A. Right

B. Wrong

Answer：B

10、When a vehicle follows another vehicle on a mountain road, it should ____.

A. Properly increase the safe distance

B. Closely follow the vehicle in front

C. Properly reduce the safe distance

D. Try to find a chance to overtake

Answer：A

11、Whats the meaning of this sign?

A. expressway left exit ahead

B. expressway destination ahead

C. expressway right exit ahead

D. expressway next exit ahead

Answer：D

12、When a vehicle running at night encounters a curve ahead, its lighting ____.

A. Leave the road surface

B. Moves from the center of the road to the roadside

C. Does not change its distance

D. Become lower

Answer：B

13、When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer：A

14、Whats the meaning of the white markings on the road?

A. road construction marking

B. horizontal deceleration marking

C. vertical deceleration marking

D. fewer lanes indication marking

Answer：B

15、How to pass when encountering this situation at the intersection?

A. make sure it is safe to pass

B. turn right and speed up to pass

C. speed up and pass straight

D. turn left and speed up to pass

Answer：A

16、When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer：A

17、When an accident has caused congestion on an expressway, the vehicles may run in the emergency strip on the right or in the shoulder of the road.

A. Right

B. Wrong

Answer：B

18、It lights to indicate that ______