河池英文驾考科目

1、What marking are the white serrated solid lines in the circle?

A. guide lane lines

B. direction guide line

C. variable guide lane line

D. one-way driving line

Answer：C

2、If a front tire blowout has caused a turn in direction, the driver should not avoid excess adjustment. Instead, he should control the direction of the vehicle, ____, and slowly reduce the speed of the vehicle.

A. Apply emergency braking

B. Use the handbrake

C. Gently depress the brake pedal

D. Swiftly depress the brake pedal

Answer：C

3、When the light switch is rotated to the position, the whole car lights turn on.

A. Right

B. Wrong

Answer：B

4、When seeing a watch for children sign while driving, the driver should _______.

A. Speed up and pass

B. Bypass

C. Maintain the normal speed

D. Carefully select a speed

Answer：D

5、What kind of marking are the double yellow solid lines in the middle of the road?

A. auxiliary marking

B. warning sign

C. prohibitive marking

D. indicative marking

Answer：C

6、How to use lights at night while crossing each other on narrow road or bridge?

A. turn off all the lights

B. turn on the low beam lights

C. turn off the head lights

D. turn on high beam lights

Answer：B

7、After starting the engine, it lights to indicate that ______

A. fuel pump abnormal or malfunction

B. ignition system malfunction

C. fuel supply system is abnormal

D. fuel in tank reaches the minimum level

Answer：D

8、Whats the meaning of this sign?

A. road narrows on the left side

B. narrow bridge

C. narrow road

D. road narrows on the right side

Answer：B

9、When changing lanes on an expressway, the driver should turn on the turn signal in advance, observe the traffic conditions, and slowly turn the steering wheel and enter the new lane after making sure it is safe to do so.

A. Right

B. Wrong

Answer：A

10、Whats the meaning of this sign?

A. flat intersection

B. flat ring intersection

C. attention to interactive intersection

D. attention to separate intersection

Answer：D

11、When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer：C

12、Speed up when passing the overflowing road.

A. Right

B. Wrong

Answer：B

13、What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road exit

D. road exit marking

Answer：D

14、What markings are the two double yellow broken lines on the road?

A. two-way lanes dividing line

B. variable lane line

C. lane-dividing line that can be crossed

D. one-way lanes dividing line

Answer：B

15、What to do besides controlling speed less than 20km/hr when the visibility is lower than 50 meters on the expressway?

A. run in the emergency lane

B. leave the expressway as soon as possible

C. stop by the roadside as soon as possible

D. run slowly in the road shoulder

Answer：B

16、If a motorized vehicle breaks down or causes a traffic accident on the expressway and cannot to run normally, the vehicle should be towed by ______.

A. a vehicle passing by

B. a large bus

C. a vehicle traveling together

D. a tow truck

Answer：D

17、Whats the meaning of the area between two yellow broken lines in the circle?