您的位置:驾驶员之家 >> 驾照考试英语题库 >> 内蒙古考驾驶证英文题库

内蒙古考驾驶证英文题库

1、Driving a motorized vehicle shall not overtake in tunnels, steep slopes and other special sections.

A. Right

B. Wrong

Answer:A

2、What is this traffic sign?

A. slippery section

B. sharp curve

C. inverse curve

D. continuous curves

Answer:D

3、The method of this small passenger vehicle to leave the expressway lane is correct.

A. Right

B. Wrong

Answer:A

4、Which is correct when learning driving on road?

A. drive the corresponding coach car with coach sitting by to guide

B. drive the corresponding coach car alone

C. drive the corresponding coach car with other one who is not a coach sitting by to guide

D. drive the private car with coach sitting by to guide

Answer:A

5、This set of the hand signals of the traffic police indicates that the vehicles should ___ .

A. turn right

B. pull over

C. turn left

D. stop

Answer:D

6、In which situation cannot overtake a vehicle in front?

A. vehicle in front is reducing speed to yield

B. vehicle in front is turning left

C. vehicle in front is pulling over by the roadside

D. vehicle in front is turning right

Answer:B

7、Whats the meaning of this sign?

A. reduce speed and go slowly

B. watch for danger

C. jammed section

D. accident-prone section

Answer:B

8、When overtaking a vehicle stopping on the right side, the driver should ________ in case that vehicle starts up suddenly or opens the door.

A. Speed up and pass

B. Keep honking

C. Maintain the normal speed

D. Keep a safe horizontal distance from that vehicle, reduce speed and pass

Answer:D

9、Whats the meaning of this sign?

A. expressway public phone

B. expressway police phone

C. expressway emergency phone

D. expressway rescue phone

Answer:C

10、When discovering traffic congestion ahead while driving, the driver should ________.

A. Find a chance to overtake the vehicle in front

B. Weave through other vehicles

C. Reduce speed, stop and wait in line

D. Honk to urge other vehicles

Answer:C

11、When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer:D

12、Whats the meaning of this sign?

A. expressway bus station ahead

B. expressway shelter ahead

C. expressway service area ahead

D. expressway toll station ahead

Answer:C

13、What marking is the yellow road surface in the center of the intersection?

A. central circle

B. guide line

C. cross-hatched marking

D. parking area

Answer:C

14、Whats the meaning of the double white solid lines in far front of the intersection?

A. stopping and yield line

B. slowdown and yield line

C. left-turn waiting line

D. waiting to run line

Answer:A

15、When causing a road accident involving property damage, the parties to the accident have no dispute over the fact and cause, they should take photos of the scene or mark the vehicles location when they move the vehicles.

A. Right

B. Wrong

Answer:A

16、What is the max speed when down slope, turning around and U turn?

A. 50km/hr

B. 60km/hr

C. 30km/hr

D. 40km/hr

Answer:C

17、Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer:A

18、Whats the meaning of this sign?

A. distance to a tourist area

B. category of a tourist area

C. direction of a tourist area

D. symbol of a tourist area

Answer:C

19、If the registration paper, license plate and vehicle license of a motorized vehicle are lost or destroyed, the vehicle owner should apply for reissuing or replacing them to the _______________.

A. traffic police detachment vehicle management station at the residential place

B. vehicle management station at the issuing place of the driving license

C. vehicle management station at the registration place

D. local police station

Answer:C

20、Steering wheel will be locked if removing the key while the ignition switch is in the LOCK position.

A. Right

B. Wrong

Answer:A