您的位置:驾驶员之家 >> 驾照考试英语题库 >> 那曲驾照英文对照

那曲驾照英文对照

1、The yellow lane-dividing line in the picture is used to separate the traffic flow in opposite directions, crossing the line to overtake or make a turn is allowed if it is safe.

A. Right

B. Wrong

Answer:A

2、What marking is the white polylines in the circle?

A. ascertaining the distance between the vehicles

B. driving at reduced speed

C. ascertaining the speed of the vehicles

D. reducing the speed at the intersection

Answer:A

3、Whats the meaning of this sign?

A. provincial highway No.

B. county road No.

C. township road No.

D. national highway No.

Answer:C

4、Whats the meaning of this sign?

A. running by right side

B. no going straight

C. straight one-way road

D. yield if going to go straight

Answer:C

5、As the traffic flow at an interchange is generally one-way, the vehicles do not have to reduce speed when passing.

A. Right

B. Wrong

Answer:B

6、Whats the meaning of this sign?

A. Road traffic flow monitoring

B. Deceleration photographed area

C. Full section snapshot

D. Traffic monitoring equipment

Answer:D

7、When a motorized vehicle makes a U turn, turns around or goes down a slope, the maximum speed should not exceed 40 kilometers per hour.

A. Right

B. Wrong

Answer:B

8、Whats the meaning of this guide arrow?

A. no passing

B. driving lane

C. merging

D. going straight

Answer:D

9、Whats the meaning of this sign?

A. no entry for bicycles

B. lane for non-motorized vehicles

C. special lane for bicycles

D. bicycle stopping area

Answer:B

10、When a vehicle approaches a bus stopping at a bus stop, the driver should ______ in case the bus starts up suddenly or pedestrians cross in front of the bus.

A. Reduce speed, keep a sufficient distance and be ready to stop anytime

B. Maintain the normal speed

C. Honk to remind, speed up and pass

D. Be ready to apply emergency braking

Answer:A

11、Whats the meaning of this sign?

A. embankment road

B. dangerous hillside road

C. rock-falling road

D. cliffside road

Answer:B

12、When encountering non-motorized vehicles cutting in on the road, the driver should ___.

A. Honk to warn

B. Speed up and pass

C. Reduce speed and yield

D. Suddenly speed up when approaching

Answer:C

13、Ignition switch in the ON position, the vehicle can not use electrical appliances.

A. Right

B. Wrong

Answer:B

14、It lights to remind that engine needs to add oil.

A. Right

B. Wrong

Answer:B

15、What kind of sign is it?

A. directional sign

B. indicative sign

C. prohibitive sign

D. warning sign

Answer:A

16、When a vehicle enters a two-way tunnel, the driver should turn on ________.

A. The hazard lights

B. The high beam light

C. The fog light

D. The width light or the low beam light

Answer:D

17、It flashes when turning on the hazard lights.

A. Right

B. Wrong

Answer:A

18、Whats the meaning of this sign?

A. hump bridge

B. high outburst road

C. low-lying road

D. bump road

Answer:A

19、It lights to indicate that ______

A. the hazard lights flash

B. right-turn signal flashes

C. left-turn signal flashes

D. front and rear width lights flash

Answer:A

20、This traffic light means ______

A. intersection warning

B. no passing

C. draw attention

D. allow to pass

Answer:D